1994), an effect observed for some lamellar aggregates of LHCII a

1994), an effect observed for some lamellar aggregates of LHCII as well. Thus, some caution is advised with the use of this technique especially for sensitive, highly organized molecular assemblies. In order to induce the

highest LD for a given magnitude of squeezing for disc-shaped and rod-like particles, the squeezing NVP-BSK805 ic50 should be one or two dimensional, respectively. For vesicles, one-dimensional squeezing yields a higher degree of dichroism. In all these cases, the distribution functions of the particles can be calculated, and thus, the LD can be given as a function of squeezing parameter, and thus opening the possibility for the determination, with good precision, of the orientation angles of the transition dipoles (see Garab 1996 and references therein). Quantitative evaluation of LD data For idealized cases, e.g., for perfectly aligned and planar membranes, the orientation Erismodegib chemical structure angle θ of the transition dipole with respect to the membrane normal can readily be calculated:

LD = A ∥ − A ⊥ = 3A (1 − 3 cos2θ)/2, where A is the isotropic absorbance and the subscripts ∥ and ⊥, respectively, stand for polarization planes parallel and perpendicular to the idealized membrane plane. It follows that if a transition dipole is oriented at θ = 54.7°, the magic angle, LD will vanish similarly as for random samples or random orientations of the same transition dipole moment. (A similar equation for the rod-shaped particles is LD = A ∥ − A ⊥ = 3A (3 cos2θ − 1)/2, in which the orientation angle is determined with respect to the long axis of the particle, e.g., a CP-690550 in vivo pigment–protein complex; this axis is taken as the ∥ direction.) The orientation angle can be obtained from S = LD/3A, which can vary between −0.5 and 1 as a function of θ. Evidently, in real systems, the value of S depends not only on the θ orientation angle of the dipole but also on the distribution of the lamellar plane around their idealized alignment.

This distribution function, as mentioned above, is determined by the squeezing parameter (Ganago and Fock 1981; Garab 1996). Additional corrections might be necessary, e.g., for Reverse transcriptase structural factors, such as the membrane curvature. In order to calculate the orientation angle from the LD spectra, one can also use internal calibration, to a known orientation of a molecule within the complex (Croce et al. 1999; Georgakopoulou et al. 2003), and make additional measurements, such as the polarized fluorescence emission—for the Fenna–Matthews–Olson complex (FMO) (Wendling et al. 2002). In practice, it is often not possible to speak of the orientation angle θ because a complex may contain many pigments with overlapping absorption bands (for a proper way of dealing with those cases, see, e.g., Van Amerongen et al. 2000). This is illustrated for the FMO complex of Prosthecochloris austuarii in Fig.

Comments are closed.