“
“Review There is currently an increasing interest in proton therapy in the world and the number of proton therapy facilities is rapidly increasing; mostly owing to the fact that physicians acknowledge that even the best current technique of X-ray therapy (intensity

modulated proton therapy, IMRT) are still far from maximizing the therapeutic gain, i.e. increasing the local tumour control and decreasing the morbidity in healthy tissues. The concern about late effects for “”low”" doses to https://www.selleckchem.com/products/frax597.html normal organs is particularly relevant in children. At the moment there are approximately 25 proton centres in operation worldwide and dozens of new ones are being planned. The aim of this work is to describe the most representative patient JSH-23 research buy positioning solutions which are in clinical use in some proton radiotherapy centres and to comment on the advantages of robotic positioning in fixed beam delivery scenarios in terms of cost-effectiveness as compared to the moving gantry delivery solutions. Obstacles to the diffusion of proton therapy The principal obstacle to the diffusion of proton therapy is the high cost for installation. Currently, proton-therapy is more expensive than photon-therapy and the high costs are mostly

due to the beam delivery system. In 2003, Goitein and Jermann [1] estimated the relative costs of proton and photon therapy, concluding that, with some foreseeable improvements, the ratio of costs protons/photons was likely to be about NCT-501 1.7. However, these estimates next are probably outdated. Reimbursement rates currently allow the development and operation of proton-therapy facilities with a reasonable profit margin. In the future, it is likely, as these facilities reach full operational capacity that the reimbursement rates for proton-therapy treatment delivery will decrease as capital costs are spread among more patients. One of the main issues in assessing the cost-effectiveness of proton-radiotherapy is the choice between moving gantries and fixed gantries with robotic patient positioning systems. In fact there are two types of beam lines in treatment rooms: isocentric gantries and fixed

(usually horizontal) beam lines. In isocentric gantry rooms, the structure supports the beam line including large bending magnets that cause the beam to be bent first in any direction focusing on the target. The gantries, with their magnets and counterweights, using present technology, typically weigh from 120 to 190 tons. The rotating diameter of an isocentric gantry is typically 10 m or more, some smaller diameter gantries (i.e. compact gantries typically < 3 m) exist; however, depending upon the design they weigh even more. The entire gantry structure can be rotated in space around the patient so that the beam can be directed at the patient from a limited angle range (e.g. within a 180-degree rotation) or from any angle (within a 360-degree gantry rotation), depending on the technology.